U314 Automatic Nozzle

U314 Automatic Nozzle

U314 Automatic nozzles are designed with today's customer in mind. Small, trim, light weight, easy and convenient to use. It is a rugged performer that offers long life and reliable service.

Warning

Use foreign objects to hold open automatic nozzles could result in failure to shut-off and personal injury.

Materials:

Body: Aluminum

seals: Buna-N, Viton

Main stem seals: Viton Cased Oil Seal / Graphite with Teflon

Main stem: Stainless steel

Color of insulator :

Red Green Blue Yellow Black

Features :

U314-A/C/E/G Flow rate: 0-45 L/m ( (13/16")

U314-B/D/F/H Flow rate: 0-70 L/m (15/16")

Working Pressure: 0.18Mpa

Compound Main valve and bleed poppet

Tight structure, attractive appearance. Minimum pressure Loss and

offer a maximum flow rate

Accurate flow control-

It allows customers to top off their tank to the exact amount that they

want , and it's easy to stop gasoline flow precisely.

Easily replaced rotar y 360 swivel- prevents the hose

from curling up.

Hold-open rack is available for full service applications.

The one hand control means easy setting to flow rate for customer's convenience.

Spout with gear: Making it to be holding on the spout of tank

without hand, improving your efficiency.

Flow-lock: designed to shut-off automatically when the spout is

tripped up, limiting spillage, avoiding accident.

Hand insulator- protect both nozzle and vehicle, and insulates

users' hands.

Available Colors- color chart on inside back cover

Selective splash guard.

100% Factory Tested

Replacement Parts:

Key Description

1 Spout 13/16" & Spout 15/16"

2 Full hand insulator

3 Lever-Guard Lever Assembly

4 Diaphragm Assembly

5 Vac Cap

6 Main Valve

7 Swivel BSPT3/4" & NPT3/4" & BSPT1" & NPT1"

Package:

Net Weight Cross Weight Dimension

18.75kg/case of 15 22kg/case of 15 55x34x42.5cm/case of 15

e, low cost and convenient maintenance, vane pump is widely adopted in many industrial areas. Most of domestic manufacturer of fuel dispenser install vane pump as component. Vane pump includes ration pump and variable pump, the former is mounted in fuel dispenser. At recent years, the domestic noise research for vane pump has been achieved good progress conducted by fuel dispenser manufacturer. The noise of vane pump has remarkably been downed, reaching to less than 70 d B. it is introduced as followed: 1: Cap nut 2: Adjusting bolt 3: Spring seat 4: Spring 5: Blade 6: Rotor 7: Plug 8: Spring flake 9: Axis 10: Frame 11: Overflow valve 12: Valve seat Diagram 2-1: Vane pump structure drawing Structure and working principle of vane pump The Diagram 2-1 and 2-2 illustrate one kind of vane pump about its structure and tridimensional exploded drawing. This kind of pump prevails in domestic fuel dispenser market. Its structure, principle and maintenance will be introduced. Vane pump consists of overflow valve and vane pump illustrated fuel dispenser in Diagram 2-1. Overflow valve is installed on the upper of body, including overflow valve seat, vale core, spring, spring bracket, jointer, adjusting bolt and cap nut. The lower body is pump section composed of gliding bearing, rotor subassembly, blade set, spring flat and pump cover with gliding bearing. The right side of diagram is inlet, the opposite outlet. The working principle, performance and common troubleshooting of vane pump and overflow valve will be presented respectively. Vane pump section The chamber in where rotor installed is pump chamber, its installing procedure showed in diagram 2-3. A centrifugal degree e between the center of chamber and rotor is illustrated in diagram. There are upper and down seal area, high pressure and low pressure transitional area, divided by the center of rotor. The angular degree in sealing area is larger than that of degree formed by the neared two vanes so as to pre fuel dispenser vent oil flow between low and high pressure areas. 1-Cap fuel dispenser

ves into the CLOSED state.　　 This may be used to temporarily shut down one or more FP s when business is　　 slack.　　 PCD Comment:　　 Where possible the PCD must utilises proprietary FP protocol features that　　 indicate that the FP is not available to the customer (e.g. switching display lights　　 off).　　 Action: The FP receives a Close_FP command.　　 Action : The FP state change is send as an unsolicited data array　　 FP_Status_Message .　　 MAJOR-ERROR If a major error event occurs the FP moves into the INOPERATIVE state.　　 PCD Comment:　　 When the PCD detects a major error with the proprietary FP or with itself it must　　 change the IFSF FP status to INOPERATIVE.　　 Action : The FP sends the unsolicited data FP_Error_Type_Mes .　　 fuel dispenser The FP state change is send as an unsolicited data array　　 FP_Status_Message .　　 MINOR-ERROR If a minor error event occurs the FP does not change the state.　　 PCD Comment:　　 When the PCD detects a minor error with the proprietary FP or with itself it must　　 leave the IFSF FP status as IDLE and generate the respective IFSF error message.　　 Action : The FP sends the unsolicited data FP_Error_Type_Mes .　　March 2006 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.23　　 DISPENSER APPLICATION　　 Page: 37　　2.1.4 State Calling 4　　 STATE DESCRIPTION　　 fuel dispenser fuel dispenser

independent, a majority of them were named by Mr Kirchner, and some of his advisers have links to ex-Montoneros—notably Nilda Garré, the defence minister, whose ex-husband s brother reportedly set up the movement. Mr Kirchner s somewhat laissez-faire attitude towards ordinary criminals may further open him to charges of hypocrisy. While he has consistently pushed for the harshest justice for the dictatorship s henchmen, he opposes tougher sentences as a crime-fighting tool in general. The burgeoning centre-right law-and- order movement in Buenos Aires is now using the president s own language against him. “Human rights aren t only for the past,�a speaker at a recent anti-crime rally protested. No one doubts the president s sincerity in pursuing Argentina s most deplorable criminals, but he may not welcome all the consequences of reopening the darkest chapter in his country s history.  © 2006 .  About sponsorship Chile A difficult pill to swallow Sep 14th 2006 | SANTI fuel dispenser AGO From The Economist print edition A plan to tackle teenage pregnancies IF CHILE S health minister, Dr Soledad Barría, thought that making her announcement at a quiet Saturday session of a gynaecological conference would help the news to slip down more easily, she was wrong. For many in Latin America s most socially conservative country, the idea of their teenage daughters being able to nip round to their local health centre for emergency contraception—the morning- after pill—without their knowledge or consent, is too much for them to swallow. “It s like telling them just to get on with it and have sex,�lamented one working-class mother. She has reason to be worried 40% of sexually active 15-18-year-olds do not use any form of contraception, sex education is scanty, information on AIDS virtually non-existent, and condom-vending machines nowhere in sight. But the government of Michelle Bachelet, fuel dispenser president since March and herself a paedi fuel dispenser