U310 Manual Nozzle

U310 Manual Nozzle

For Heavy Duty, High-flow Truck stop, Bus and Fleet Service If you operate a full-service truck-stop, refuel your own fleet, or manage a card-lock refueling location, the low cost, long life and durability of the 120L high flow nozzle can help increase your productivity, sales and profits.

Warning

Do not use U303 Nozzles with a hold-open device on prepay self- service installations.Using foreign objects to hold-open automatic nozzles could result in failure to shut-off and personal injury.

Materials:

Body: Aluminum

seals: Buna-N, Viton

Main stem seals: Viton Cased Oil Seal / Graphite with Teflon

Main stem: Stainless steel

Color of insulator :

Red Green Blue Yellow Black

Features :

U303A/B Flow rate: 0-120L/m (113/16")

U303C/D Flow rate: 0-90 L/m (1")

Working Pressure: 0.18Mpa

U303 Automatic Nozzles for diesel, kerosene and all kinds of gasoline service.

Easily replaced spout- simply remove the screw.

Spout kits are available from HONGYANG.

Even, smooth, spray pattern- minimizes diesel foaming and false shut-offs.

Three position hold-open device- one finger control of hold-open mechanism means easy setting of flow rate.

Full hand insulator- protects both nozzle and vehicle, and insulates users' hands.Available Colors- color chart on inside back cover

Dual poppet valves- easy to open nozzle against high pressure.

Spout retaining ring- adds extra measure in securing nozzle spout in fill pipe.

100% Factory Tested.

Replacement Parts:

Key Description

1 Spout 1''

2 Spout 13/16''

3 Full hand insulator

4 Lever

5 Lever assembly

6 Diaphragm assembly

7 Main valve assembly

Package:

Net Weight Cross Weight Dimension

16kg/case of 10 19kg/case of 10 45x40x32.5cm/case of 10

Important:

The products should be used in compliance with applicable country, province and local Laws and regulations. Products selection should be based on physical Specifications and limitations and compatibility with the environmentand materials to be handled. HONGYANG makes no warranty of fitness for a particular use. All illustrations and Specifications in this literature are based on the latest products information available at the time of publication,HONGYANG reserves the right to make changes at any time in price, materials. Specifications and models and to discontinue models without notice or obligation.

ws into pipe because of adapting one pipe in two fuel dispensers or other leakage. Bottom valve in tank or single valve in pipeline is stuck and damaged, no oil into pump. Oil level is lower than bottom valve or suction nadir. Counter at beginning of operation Due to long and much soft, hose tends to bulge under a certain pressure. Transducer will count as bulging pressure out of certain scope. This trouble can’t be solved through shorten or replace hose. As leakage in bottom valve or pipe, oil flow back into tank between operation interval because of lower oil level in vapor separator and pump. Air in transducer drives to count as next time refueling. The longer interval time the more data jump. Inspect and solve pipeline leakage of oil and air. Unstable flow rate makes large tolerance; air leakage in bottom valve and pipe oil level low than bottom valve bring about much air flow into fuel dispenser fuel dispenser. Article III Important notices to dispenser’s maintenance Due to fuel dispenser located in flammable and combustible location, operator should pay much attentions to security preventing accident occur on human and equipment, and st fuel dispenser rictly abide by the following general requirements: Smoking and open flame is strictly prohibited in filling station in case lead to fire. Maintainer should, in accordance with safety regulations in filing station, not wear shoes with metal nail and chemical fiber easy to generate static. Cut power supply prior to maintain fuel dispenser; pick down V belt then empty oil filled in part where need to be done. Pour oil into container in case of splash out. Repairing tools should be explosion-proof, prohibiting randomly throw in case of generating spark and accident. Pay much attention not to the joint surfaces of seal and metal parts, which would lead to leakage. All components and sections should be cleaned so to prevent giblets or waste destroying parts. Carefully inspect wire connection after maintaining electric equipment, abstaining new trouble. fuel dispenser

DAC classe 2.2 non applicable　　 5.3.1 Contr 磍er le montant minimum accept d une transaction de paiement X　　 Note 7　　 5.3.7 Contr 磍er le montant maximum accept d une transaction de paiement sur automate X Note 7　　MF Initialisation dune transaction avec une application carte EMV　　30.2.12 Initialiser les traitements avec une application carte EMV X Suite r ception 4 par DAC　　30.1.1 Initialiser une transaction avec une application carte EMV fuel dispenser X　　 Imprim le 210203 13:02 1231　　All right reserved 铮　　 fuel dispenser Ref : NT1118R1　　 MPA V5.2: SPECIFICATIONS TECHNIQUES　　 Nb Pages : 1 + 0 PJ　　 de la LIAISON AUTOMATE-MONETIQUE　　 Date :　　POS Department　　 Description SM DAC Remarques　　MF Lecture et contr 磍e de la coh rence des donn es dune application carte de type EMV　　30.1 fuel dispenser

rcome America s addiction to the stuff it peddles. Yet Mr Tillerson claims that none of this upheaval has much bearing on how Exxon is run. The firm will stick to the same strategy, he insists, making the same investment decisions based on the same assumptions about the future of the industry as it did last year. In fact, he goes even further Exxon s strategy has not changed since 1998, when oil sold for as little as $10 a barrel. That is quite an assertion at a time when many are arguing that the oil industry is on the verge of a cataclysm. Skittish analysts fear that the big Western firms will run out of oil, or be turfed out of their most lucrative fields by nationalist governments, or see high prices erode demand and stimulate the development of alternative fuels. Even more optimistic souls assume that oil will remain dear for some time to come, justifying lavish spending to develop marginal fuel dispenser reserves in difficult terrain. But as far as Mr Tillerson is concerned, this is just the typical hyperbole that always accompanies upswings in oil s boom-and-bust cycle. As a lifelong oilman, Mr Tillerson should know. He grew up in a former oil b fuel dispenser oomtown, Wichita Falls, Texas (“the city that faith built�?. He has worked for Exxon for the past 31 of his 54 years. In fact, he joined the company straight out of the University of Texas, where he had studied engineering. During the course of his career, he has managed oilfields everywhere from Arkansas to Yemen. What is more, Mr Tillerson is the chosen successor of Lee Raymond, Exxon s previous boss. Mr Raymond s 12-year tenure was a period of unparalleled success for the company. Its market capitalisation rose from $80 billion to $360 billion, making it the most valuable listed firm in the world. (It has added another $30 billion-odd since Mr Tillerson took over.) Ruthless financial discipline underpins that rise last year, for example, Exxon earned 31 cents on every dollar it spent, half as much again as its nearest rival, BP. That helps to fuel dispenser