U209-A Electro-Mechanical Totalizer

U209-A Electro-Mechanical Totalizer
Features:
Power: DC12V
Total :7 digits
100% Factory Tested.
Packing:
Weight: Dimension:
200g/case of 1 70×32×42mm/case of 1
POPPUMP Fiji Technical Center
sales at poppump.com Tel:(001)3474109611

Features:
Power: DC12V
Total :7 digits
100% Factory Tested.
Packing:
Weight: Dimension:
200g/case of 1 70×32×42mm/case of 1
More Fuel Dispenser & Spare Parts, LPG Dispenser, CNG Dispenser, Satation Equipments and Full Solution for Fueling Station.
enerates 65”~85”W.C. vacuum pressure as operation, reclaiming vapor through reclaim pipe and nozzle, redundant vapor discharging out of exhaust pipe after vacuum pressure cap automatically open. Diagram 4-10: Built-in pump fuel dispenser with vapor recovery function Built-in pump fuel dispenser with vapor recovery function Showed in Diagram 4-10, this kind of fuel dispenser is mounted a vane pump that connected with the parallel pipes of oil delivery and vapor reclaim, in final connect into tank. At the refueling progress, fuel dispenser motor drive vane pump operating and reclaim tank vapor through nozzle and coaxial hose. System maintenance Nozzle and delivery pipe used in fuel dispenser with vapor recovery function are coaxial and double layers, simultaneously refueling and reclaiming. Paying much attention to nozzle body and delivery hose, in case of waste, bad operation and crush by vehicle. If system alarm, carefully judge the type of alarm of monitor system whether vacuum degree or exhaust pipe pressure. Adjusting and testing vacuum pump and reclaim nozzle in for situation. Inspect air cap in the latter situation. If breakaway is pull down by accident, reinstall spare pin on upper of valve body. Don’t replace the coaxial and double layers valve with general one. Troubleshooting of vapor recovery equipment Oil spurt from nozzle’s reclai fuel dispenser m spout before refueling. Solution methods: Prohibiting force refueling; Wait several seconds to take out nozzle from vehicle tank. Nozzle jump to stop in refueling process Solution methods: Maybe caused by second time operation, it is suggested not to force filing; Wait several seconds to take out nozzle from vehicle tank. Clean waste or deposited oil in air pipe of reclaiming nozzle or inspect O-ring seal. Chapter V Installation & debugging of fuel dispenser The design of fuel dispenser correlates to the correct operation. Fuel dispenser is designed to install outdoor with underground tank, not allowed to be in indoor so as to endure environmental fuel dispenser
- 3.6 Product Data Per Fuelling Mode - Data_Id s 2(Prod_Price) 3(Max_Vol) 4(Max_Fill_Time) 5 (Max_Auth_Time) can now be written to in state 5 (Authorised). - Data_Id 4(Max_Fill_Time) has extra text regarding defaults after a master resetcold start and handling when Data_Id can not be written to. - 3.7 Fuelling Point Data Base fuel dispenser - Data_Id s 2(Nb_Tran_Buffer_Not_Paid) 3(Nb_of_Historic_Trans) 4(Nb_Logical_Nozzle) have additional text explaining what to do when a write action occurs with a value that can not be supported. - Optional Data_Id 42(Current_Price_Set_Nb) added. - Extra text explaining what action to take when a state error occurs with one of the commands (Open Close Release Resume Suspend terminate). - 3.8 Logical Nozzle Data Base - Data_Id s 1(PR_Id) 7(Meter_1_Id) have additional text explaining what to do when a writ fuel dispenser e action occurs with a value that can not be supported. - 3.9 Fuelling Transaction Data Base - Extra text explaining the multiple read of current transactions. - Optional Data_Id 9(TR_Price_Set_Nb) added. - Data_Id 20(TR_Buff_Contr_Id) has been made read only. - Data_Id 31(Lock_Transaction) has additional text. - Data_Id 32(Unlock_Transaction) has additional text explaining how to fuel dispenser
uave but sleazy ex-communists. At other times? including now—it is run by prickly, eccentric anti-communists. The biggest ruling party, Law and Justice, has decidedly rum notions. It loathes gays, feminists and the secular liberal order that most of Europe equates with modernity. On foreign policy, the party s sentimental attachment to America is matched by a visceral loathing of both Germany and Russia (recently the defence minister, Radek Sikorski, likened a German-Russian gas pipeline that Poland opposes to the Nazi- So fuel dispenser viet pact of 1939). The government formed last weekend is even odder than the minority conservative administration of the past six months. Law and Justice has brought in two populist parties, the left-wing Self- Defence, and the right-wing League of Polish Families. In most European countries, such outfits would be on the fringes, not at the centre of power. Both parties have thuggish streaks, dodgy connections and peculiar ideas about politics and economics (until recently, Self-Defence wanted to cure unemployment by splurging the central bank s foreign-currency reserves). All this seems dismal to Poland s EU partners, who want a calm neighbour that plays by the rules. Instead they see a cranky, unpredictable country that reeks of backwardness; its cut-rate workers destabilise domestic labour markets; its bur fuel dispenser eaucrats can t implement the EU s rules; and its leaders make sensible decision-making impossible. Yet as our survey this week argues, this picture of Poland is misleading. The main story of the past 15 years is of stunning success and modernisation. Poland s booming service industries are unrecognisable compared with the exhausted rust-belt country of 1989. Exports are soaring. Economic growth, running at 5% or so, puts old Europe to shame. Even the emigration of a million-odd Poles has its upside. It is better to wash dishes in London than to be jobless at home. Many Poles abroad are learning new skills, languages and attitudes that will stand them in good st fuel dispenser