U102-A2 Pumping Unit

U102-A2 Pumping Unit

Materials:

Body: Aluminum (Spray-Painted)

seals: Buna-N

Technical Specifications:

Power:750-1000W

Flow Rate:45~90L/min

Rotary speed :630~730rpm

Noise: 68db(A)

Minimum. vacuum degree: 0.054Mpa

Pressure Drop: 0.12-0.25Mpa

Separate Ability of Oil and Air: >=20%

Features :

Positive displacement, self priming, internal gear type and adjustable bypass valve.

Designed for quiet, vibration-free operation.

Reusable suction strainer filter at inlet connection.

Reverse check valve at air separator float mechanism.

Check and relief valve at outlet of pumping unit.

100% Factory Tested.

Package:

Product ID Net Weight Cross Weight Dimension

U102-A2 18kg/case of 1 18.5kg/case of 1 36×32× 30cm/case of 1

dicator is installed between nozzle and measu fuel dispenser rement transducer, by which customer observes whether foam in delivering oil. Accuracy will be affected because of much foam or bubble. Diagram 2-33 is shown a common oil indicator in domestic market. Since this kind of oil indicator has big pass section than that of two ends of pipe, velocity of flow of passing oil is reduced so as to facilitate observation. If oil transparent, that is, no foam in it, fuel dispenser is in normal state. If opaque with visible foam, it is shown that there is gas in oil. Don’t refuel until foam disappears in oil indicator. If passed long time, foam in oil indicator still exists so that the accuracy of fuel dispenser is affected, some troubleshooting measures on vapor separator should be considered. Disassemble low cover and examine gasket and joint face if found leakage. Oil in pipe should be discharged completely in maintenance, keeping appropriate tightness to bolts as reassembly in case of crunching glass. 1-Frame 2-Sink-screw 3-Seal gasket 4-Glass 5-Seal 6-Cove fuel dispenser r Diagram 2-33: Ball-shaped oil indicator structure Columnar oil indicator fuel dispenser , shown in Diagram 2-34, is installed on the top of gantry fuel dispenser, the convex end connected with pipe jointer of fuel dispenser, the concave end of it with hose unit. Foam is observed through the glass pipe of columnar oil indicator. If found leakage, disassemble oil indicator from jointer, clean waste or replace damaged gasket. Replace glass pipe when found crackle on it. Be careful of reassemble hose jointer and oil indicator after maintenance in case of crunch glass pipe. 1-Frame 2-Glass pipe 3-Seal ring 4-O-ring Diagram 2-34: Columnar oil indicator Firstly empty oil in fuel dispenser when deal with oil indicator’s trouble, for fear of oil splashing. There is a kind of method to empty here: loose bolt on corrugated pipe after start up fuel dispenser. In this state, no oil in tank is suck into fuel dispenser, but oil in fuel dispenser is discharged out continually. After stop

value 000　　 41 Card acceptor t fuel dispenser erminal ans 8 Mandatory　　 identification　　 42 Card acceptor identification code ans 15 Mandatory　　 43 Card acceptor namelocation LLVAR ans ..99 Optional - if not available supplied by the FEP　　 Not required for German Debit cards　　 45 Track 1 data LLVAR ans ..76 Conditional Not used in Europe　　 Not required for German Debit cards　　 47 Track 3 Elements LLLVAR ans 999 Conditional if card scheme requires it　　 Required for German Debit cards　　 48 Message control data elements LLLVAR ans ..999 Mandatory; See below for specific fi fuel dispenser elds　　 48-0 Bit map b fuel dispenser 8 Specifies which data elements are present.　　 48-3 Language code a 2 Optional. Language used for display or print.　　 Values according to ISO 639.　　 Not required for German Debit cards　　 48-4 Batchsequence number n 10 Mandatory. Current batch sales report number　　 used to group a number of transactions for day-　　 Wednesday 10 May 2006 - Revision 03　　Document title　　IFSF POS to FEP Interface　　Section

ted the rejectionist alliance. Seeking target fuel dispenser s to retaliate against after September 11th, the Bush administration chose to focus on what it labelled “state sponsors� of terrorism. It also lumped together groups such as Hizbullah and Hamas, whose chief agenda was local and nationalist and did not threaten America, with the global terrorist network of al-Qaeda, which had not only declared war on the superpower and on “Jews and Crusaders� but had also launched hostilities in the most dramatic fashion conceivable. In May 2002 the administration added Syria to its “axis of evil�(originally Iran, Iraq and North Korea). This seemed odd at the time, since Syria was providing America with useful counter-terrorism intelligence, and Iran had played a helpful role in the overthrow of the Taliban in Afghanistan. In 2003 America rebuffed a back-channel Iranian effort to start a dialogue, and later that year slapped sanctions on Syria. “We would have been happy to play the game with them,�sighed a Syrian official at the time. “But they wanted all fuel dispenser our cards with nothing in return.� America s invasion of Iraq, meanwhile, fuel dispenser produced a cascade of responses that bolstered the resistance front. The intrusion threatened to drive a physical wedge between Iran and Syria, and so reinforced their mutual need. It emboldened Iraq s Kurdish minority, so raising fears of unrest in Syria s and Iran s own oppressed Kurdish regions. Yet it also empowered the long-disenfranchised Shia majority, a natural bridgehead for Iranian influence. And obviously it removed Saddam Hussein s army, the main military obstacle to the projection of that influence farther afield. Far more important, the invasion massively buttressed the old rejectionist thesis that America s aim was to divide and rule the Muslim world, to control its oil and to impose Western culture. Here, stirring faded memories, was a Christian army overrunning a Muslim land, in pursuit of what George Bush once carelessly called a “crusade�aga