K-G22 FUEL DISPENSER

K-G22 FUEL DISPENSER

Pump : Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :ype LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H): 1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

layers of oil resistance and erosive resistance. Single thread and aluminum wire are prohibited. Diagram 5-7: Wiring in TN-S Power supply system The connection between fuel dispenser and distributing room adopts bushing-pipe burry, preventing vehicle crush wires. The wire pipe installed at bottom of fuel dispenser should have downward elbow in case oil pouring into and erode wire. No jointer is set between the pipeline of junction box and wire outlet, in case of sparkle jeopardy. User’s wire should correspond to earthing line and power lines after importing exploision-proof junction box. Tighten nut and clamp wires ensuring the explosion-proof performance. Change one of three wires if motor does not work. If adopting TN-S power supply system, wiring from switchboard are connected as diagram 5-7 illustration. If adopting TN-C-S OR TN-C system, wiring as Diagram 5-8. Grounding of fuel dispenser is in well condition. It is to adopt brass wire with PVC insulting bushing as communicating line between fuel dispensers. Communicating line is buried in galvanized pipe. Diagram 5-8: Wiring in TN-C-S or TN-C Power supply system Fuel dispenser should set single earthing line, with resistance no more than 4Ωto earth, 10 Ωnozzle to earth. User’s wire should adopt copper line with no less than 6mm2 section in single phase motor. Otherwise, there is something wrong with motor, e fuel dispenser ven resulting in fuel dispenser electric trouble. Diagram 5-9: Wiring Diagram of Communicating Box Article II Submersible pump type dispenser and its installation Compared with fuel dispense mounted suction pump, submersible pump fuel dispenser has many merits such as low noise, stable operation, cost-efficient pipeline, and is installed in large station, which is the development direction of fuel dispenser industry. Submersible pump fuel dispenser consists of main frame, submersible pump and electric control box, which are communicated through electric and signal cable. See Diagram 5-10. Diagram 5-10: System Drawing of Submersible pump fuel dispenser

0 Reject any write attempts with a Data_ACK value of　　 2 (Read OnlyNot Writable).　　 1 Must set the Data_Id to the hardcoded value.　　 When a master resetcold start occurs on the dispenser　　 device the dispenser should reset this Data_Id to its　　 default value.　　 PCD Handling:　　 Where the proprietary pump connected to the PCD can　　 not support this display handling mechanism directly the　　 PCD will have to treat this Data_Id as having a　　 hardcoded and unchangeable value. (See above for more　　 explanation).　　FP31_2.22 IFSF - STANDARD FORECOURT PROTOCOL October 2005　　 DISPENSER APPLICATION　　Page: 74　　 44 Bcd4 R(1-9) M　　 Amount_Rounding_Type　　 (2CH) W(1-2)　　 Specifies the rounding process applied to the amount field.　　 The rounding is done on the last 4 digits.　　 Rounding is done to the closest value to minimize the　　 error between the real value and the rounded value. If the　　 fuel dispenser differen fuel dispenser ce to the high value and the low value is the same　　 then the value should be rounded up.　　 Rounding must be done to the closest value to minimise　　 the error between the real value and the rounded value.　　 The rounded value should be a multiple of the　　 Amount_Rounding_Type (ART).　　 An ART of 0000 is not allowed.　　 Default ART value is 0001.　　 Examples:　　 Amount = 1234.56 ART=0001 Result = 1234.56　　 000 fuel dispenser

ome to Seattle, looks set to go to a mail-only system in 2007, doing away with polling stations altogether. The idea is that one system will be simpler. Ron Sims, the county executive, explains that this will be cheaper in the long term. And he thinks voters prefer it. Polling stations are going out of fashion in plenty of western states. There are three basic forms of postal voting. The most common is absentee voting. If a voter will be out of town on election day, he can request a postal ballot. All states allow this, and nationwide about 13% of all ballots counted are absentee. But some states, including California, go a step further by allowing voters to register as permanent absentees—so that at every election they will automatically receive a ballot in the mail, regardless of whether they are at away or at home. In the 2004 general election a third of the votes in California were absentee and 18% were permanent ones. In last year s special election, 40% of ballots cast were absentee ones with the figure being over half in many Bay Area counties. The biggest switch is to allow mail-only voting. The pioneer was Oregon, where polling stations got axed in 2000. Arizonans will probably get a chance to decide in November whether to switch. In Washington and Colorado, that decision is left to counties—and most are making the change (the one twist being that fuel dispenser in Colorado you a fuel dispenser re not yet allowed to go mail-only in even-year partisan elections). An hour or two in the queue The main reason to change is convenience. Western states are famous for masses of ballot initiatives that can take hours to decipher. “In 2000, think about what it would have been like in a polling place if you had to wait in line while every voter had to work through 26 measures,�says Bill Bradbury, Oregon s secretary of state. Oregon also helpfully sends everyone voter pamphlets, which give the background on both sides of an initiative. Fans of postal voting claim that convenience increases turnout, espec fuel dispenser