F-GB6Q FUEL DISPENSER

F-GB6Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy :±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :350kg

Dimension(L×W×H): 1860*660*2190(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 17

is filled oil whenever refuel or stop operating. The inner cubage of hose varies upon basis of hose’s interior pressure owing to different pressure as stop working or refueling. The varied degree correlates with working pressure, material and length of hose. Hence, exactitude is affected by above variability. Service life testing In the new national standard GB/T9081-2001 Fuel Dispenser for Vehicle, the testing is called as test for working stability. The purpose is to assess the whole performances, namely, how long key components can be operated without no trouble condition, especially component of flow meter. Testing time is 100 hours. Measuring accuracy fluctuation not exceed ±0.15% stipulated in GB-9081-2001. The above six items of model testing comprehensively assess the fuel dispenser’s performances, mainly examining accuracy of flow meter, vapor separator, hose. As so many fuel dispensers are adapting taxation supervision device that model testing stipulated in regulations includes other nine items supplementary testing of environmental and electromagnetic interference, such as high and low temperature, wet-hot interchange, vibration, source adaptability, instantaneous power cut, voltage decline, static di fuel dispenser scharge, sensibility of radiation electric magnetic flied, sensibility of electric pulse. Only factory passed over the above testings and having obtained production license could manufacture fuel dispenser as large quantity. In summary, fuel dispe fuel dispenser nser’s measuring management mainly is carried out through model approval and examination fuel dispenser and appraisal of every phase. However, as for each technical requirement to fuel dispenser is inspected, supervised and implemented also through model approval and every phase’s examination and appraisal. Article II Appraised condition and apparatus Except for the initial approval carried out in factory, other fuel dispenser�approvals are implemented on spot. Equipment used for preventing sunlight, rainwater and wind should be access so as to ensu

Bcd2 R(1-9) M　　 Blend_Tolerance　　 (07H) (0-99) W(1-2)　　 Specifies the blending error tolerance the percentage (0-　　 99%) indicates the calculation accuracy.　　 0 = no control is done　　 Please note that dispensers that do not permit the　　 Blend_Tolerance to be changed remotely should:　　 Reject any write attempts with a Data_ACK　　 value of 2 (Read OnlyNot Writable).　　 Must set the Blend_Tolerance to the hardcoded　　 country code value.　　 When a master resetcold start occurs on the dispenser　　 device the dispenser should reset this Data_Id to its　　 default value.　　 8 bin8 R(1-9) O　　 Drive_Off_Lights_Mode　　 (08H) (0-3) W(1-2)　　 The external visible status light for drive off fuel dispenser could be　　 controlled on different ways:　　 0 = drive off light not used　　 1 = remote control by the Drive_Off_Light_Switch　　 2 = internal control: Red light mode (light is on when a　　 fuel dispenser fuelling has started it goes off when the fuelling　　 transaction is fuel dispenser paid)　　 3 = internal control: Green light mode (FP is available for　　 the next fuelling)　　 PCD Comment:　　 As this is an optional data field the PCD can NAK any　　 write requests to this Data_Id with a Data_ACK code of 4　　 (Data does not exist in this device) or reply to any read　　 request with an answer messag

d States China SURVEYS A new train set Foreign policy BUSINESS How to go global Foreign investment in Russia Management Reading An enemy of the people Business Education Black Republicans Executive Dialogue Are there any? Wine Sweet taste of success FINANCE & ECONOMICS Political appointments Mr Kempthorne goes to Washington Economics Focus French economic nationalism Economics A-Z fuel dispenser Colbert was here The Illinois governor s race SCIENCE & TECHNOLOGY Punches and Judy fuel dispenser Face value fuel dispenser A healthier addiction Technology Quarterly New York schools Pennies from heaven PEOPLE Special Report Obituary The potato industry Pass the spuds