D-GC8Q FUEL DISPENSER

D-GC8Q FUEL DISPENSER

FlowMeter Type :Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight : 425kg

Dimension(L×W×H): 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 26

pistons in same axis line are connected through connecting rod. A column spring is set between each piston and connecting rod, piston and connecting rod move along axis direction. An O ring is installed between connecting rod and piston to prevent leakage. A small axis is inserted into the holes of upper and lower connecting rods. A circle nylon wheel is set between the upper groove of upper connecting rod and two pistons. The small axis of nylon wheel is inserted into the hole of crankshaft. Piston 16 and piston 26 mounted adjusting piston. Four pistons installed at the end of frame respectively. The journey of adjusting fuel dispenser piston is adjusted by the adjusting bolt installed at the end cover. 1-Outlet elbow 2-End cover 3-Piston 4-Frame 5-Connecting sheet 6-Low connecting bar 7-Upper connecting rod 8-Cylinder bushing 9-Adjusting bolt 10-Cap nut 11-Regulalting piston 12-Driving elbow 13-Brass bushing 14-O-ring 15-Rotation output axis 16-Nylon wheel Diagram 2-17: Structural chart of metal piston measurement transducer Working principle Pistons shuttle under the oil pressure after clean and no-air oil flow into measurement transducer via vapor separator. The two pistons16 and 23 illustrated in Diagram 2-16 impel nylon wheel round one after another, the driving elbow is rotated by the axis of nylon wheel and export the number of rotation. Meanwhile, the oil calculated flow out of outlet through measurement transducer. The rotation is corresponding to the oil volume. The oil volume passed over measurement transducer is a stable constant. A complete working circulation of four pistons under oil pressure is corresponded to a unit circle of export axis. Diagram 2-18 shows the four working status during a whole working circulation. Diagram 2-18 is a simplified working principle drawing of measurement transducer. In order to facilitate explanation label the cylinders and pistons fuel dispenser as 1, 2, 3 and 4, the position of most far away the center of piston called the furthest point, nearest position called the nearest point fuel dispenser

TOTALS　　June 2005 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.21　　 DISPENSER APPLICATION　　 Page: 115　　 20 Long_ R(1-9) M　　 Log_Noz_Vol_Total　　 (14H) Volume W(1-2)　　 Volume total for the respective logical nozzle.　　 The total update is done after the fuel dispenser fuelling is stored in the　　 transaction buffer.　　 PCD Comment:　　 If the proprietary pump protocol doesn t supply the　　 respective nozzle volume total the PCD will have to　　 calculate the total itself.　　 21 Long_ R(1-9) M　　 Log_Noz_Amount_Total　　 (15H) Amount W(1-2)　　 Amount total of the respective logical nozzle.　　 The total update is done after the fuelling is stored in the　　 transaction buffer.　　 PCD Comment:　　 If the proprietary pump protocol doesn t supply the　　 respective nozzle amount total the PCD will have to　　 calculate the total itself.　　 22 Long_ R(1-9) M　　 No_TR_Total　　 (16H) Number W(1-2)　　 Number of transactions provided by this logical nozzle.　　 PCD Comment:　　 The PCD will have to maintain this transaction count　　 to fuel dispenser tal.　　 STAND ALONE TOTALS　　 30 fuel dispenser

itician, Anwar Kamal Marwat, a florid gentleman of military bearing and parliamentary leader of the Pakistan Muslim League-Nawaz in the NWFP assembly. By chance, Mr Kamal had that evening returned from a distant jirga, or tribal council, involving several hundred elders from Pakistan and Afghanistan, representing several dozen Pushtun tribes and their constituent clans. The jirga had been convened to settle a blood-money claim against the Marwat tribe, which Mr Kamal leads, incurred in April 2004. For several years previously, the Marwat had been feuding with their neighbours, the Bhattani, another small Pushtun t fuel dispenser ribe. The tit-for-tat offences were quite piffling, said Mr Kamal—a spot of thieving or kidnapping of fighting-age males. Then some Bhattani hotheads abducted two Marwat girls; and Mr Kamal went Pushtun-postal. Leading an army of 4,000 Marwat fighters, equipped with artillery, he levelled a Bhattani town, killing 80 people, including the two unlucky, but nonetheless dishonoured, girls. Neither the bloodletting, nor the jirga that followed it (which stung Mr Kamal and his tribe for $60,000), seem even to have been mentioned in the Pakistani press. Asked whether he saw any contradiction in a senior lawmaker instigating such extreme violence, Mr Kamal appeared astonished. “Well, we don t claim this is something to be proud of,�he stuttered. “But it is a question of prestige, you see, a question of honour.�In other words, he might have said, paraphrasing Mr Khan it is his sin that he is Pushtun. It is over 250 years since Afghanistan was cobbled together, from many ethnic groups, and two centuries since British colonisers tried stretching their writ to India s (now Pakistan s) north-western frontier, where the plains crumple up towards the Hindu Kush. Yet, in both places, a large part of the population is still wedded to Pushtunwali. Some 15m P fuel dispenser ushtuns live in Afghanistan, or 50% of its population; and 28m in Pakistan, mostly in NWFP, representing about 15% of the popu fuel dispenser