POPPUMP Fiji Technical Center

Tel:(001)3474109611

POPPUMP logo

POPPUMP Fiji Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

D-GB66 FUEL DISPENSER

D-GB66

D-GB66 FUEL DISPENSER

Pump Type :Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :405kg

Dimension(L×W×H) :1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 28 20ft: 13

products links

links

technical archives

    l type fuel dispenser. Article I Failure judgment and troubleshooting Normal operation without fuel 1.1 If motor turn reversely, power phase would be wrong; if delivery V belt loose and rupture, regulating expansion wheel or replacing V wheel. 1.2 Vapor separator failure If triangular gasket of inlet and filter washer is loose or broken, air would flow into hydraulic system. To solve this kind of leakage is to tighten bolt or change a new washer. Serious jam in filter, including cone-shaped net, should clean waster or change a new fuel dispenser filter net. If the check valve of vapor separator is clamped, resulting in no delivery, disconnect check valve and clean it, finally reassemble. Incorrect installation of floater or waster under sealed gasket in vapor separator, oil would be discharged from exhausting pipe. To clean waster and reassemble, change a new floater when find serious damage or not being homocentric. If small floater is leak or fall down, high pressure chamber can reach high pressure so that no delivery in fuel dispenser. Broken upper cover gasket also result in the communication between two chambers of high pressure and vapor separator so that no discharge out of fuel dispenser. 1.3. Pump trouble Substance clamped between valve core and valve seat in overflow valve result in oil circulate within pump. Taking out valve core and clean feculence, fix falling valve seat, changing pump when necessary. Due to high speed rotation some vane abrasion or damaged the inner pressure of pump is reduced largely, even lost suction capacity. Replacing damaged vane after cleaning feculence. Broken gasket or reverse installa fuel dispenser tion in the surface between pump and vapor separator result in the communication of high and low pressure chambers so that no oil is discharged. Rot fuel dispenser or and stator are loose, making pump axis run without loan. It is need to replace rotor or pump. Long operation increases the clearance between inner and outer gear, resulting large interior leakage and suction capacity declining

technical specification

    Use Annotation   OutDeviceTarget DeviceType Required See above table for detail.   InputSynchronize xs:boolean Optional Flag to tell if the output must finish when the input within the same   request is completed.   Complete xs:boolean Optional Flag to state that this is the last request fuel dispenser of a sequence.   Immediate xs:boolean Optional For printer output it discriminates output that have to be printed   immediately (i.e. printout is part of the authorization process and   EPS needs it to be fulfilled asap) from output that can be stored   and done later (POS response given immediately but the printout   will be done later; i.e. after CardServiceResponse the POS will   complete the sale receipt and combine it with the EPS card receipt   stored but not yet printed).   CharSet Xs:short optional fuel dispenser The Internet Assigned Numbers Authority (IANA) has defined the   fuel dispenser numeric coding to identify character sets in a document   (www.iana.orgassignmentscharacter-sets); this coding uses 

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    but also because they re buying so much more. Asian consumers are on a spending spree, splashing out on anything from mobile phones to designer clothes. They know how to spend Asia is the world s fastest-growing consumer market. The IMF forecasts that total household spending there will rise by almost 7% in real terms this year. In comparison, the 3% growth in American consumption looks almost parsimonious. Although America s consumer spending is still larger than the whole of Asia s in current dollars, the growth in Asian spen fuel dispenser ding this year will be half as big again as that in America. Asia s consumer market already exceeds America s if converted at purchasing-power parity (which makes sense, because housing and domestic services are much cheaper in poorer countries, leaving more of a given sum to spend on consumer durables and the like). No wonder Wal-Mart, the world s biggest retailer, is eager to expand in China. This week it agreed to buy the country s second- largest hypermarket chain. International retailers are battling to get a stake in China as rising living standards and rapid urbanisation create masses of new consumers. On today s trends, the consumer market there, measured in PPP, will overtake America s by 2020. Economists, who tend to be less excitable than retailers, point out that Asian consumption levels are still fairly low. In Asia, household consumption accounts for only around 55% of GDP on average, compared with 71% in America. But it is the pace of the increase in consumer spending as much as its share of GDP that determines overall growth. And the lower consumption s current share of G fuel dispenser DP, the more scope there is for it to grow. Still, however bouncy Asian consumers are feeling, slowing growth means that America will buy fewer g fuel dispenser oods from the rest of the world. So the big question is how much the rest of the world depends on exporting to America. And the answer is less than is generally thought. Smaller Asian economies, notably Taiwan, are heavily expor