D-GB6 FUEL DISPENSER

D-GB6 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type :Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition:-40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose:4.5m

Weight :385kg

Dimension(L×W×H) :1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 28 20ft: 13

ion without authorization; illegal disassemble or modify IC card so as to change data. Apart from the above methods there are some professional attacks mainly for operating system. IC card intellectual Prevention technology mainly contains two aspects: one is for IC card itself including physical safety; the other is for information exchange process. In order to ensure the physical safety of IC card, some safety technologies are adopted in manufacture of card fuel dispenser base, such as laser engraving, fluorescent printing and macroline technology. As for possible attacks, chip manufacturers have researched many methods: Inspection of exterior voltage; Inspection of low frequency of clock; Preventing information of data bus being pick through supervision programme; Protecting memory by logical encryption; Fuse protection; Mounting encrypted calculating processor for chip. The above safety technologies are belongs to hardware aspect. Whichever technology provided for hardware platform, the prevention technologies of differential power analysis (DPA) and simple power analysis (SPA) should be considered in software. COS safety mechanism The purpose of COS safety protection aims at protection information on card and exchanged between terminal and card. Therefore, safety mechanism should be able to effectively control information, which is considered in two aspects: One is to control the right to operate information, that is, who is authorized to operate in fuel dispenser formation; the other is to process information itself, that is, encryption processing by which unauthorized person is unknown to its contents, even though he or she has got information. Other methods include: adopting enhanced Data Encryption St fuel dispenser andard (DES) calculation in operating system; memory adopts special encryption; employing specific I/O technique to prevent Differential Power Analysis (DPA) attack. The control of right to operation of COS basically is divided into two categories: authentication mechanism and safety report mechanism. In real appli

When the PCD detects a minor error with the proprietary FP or with itself it must　　 leave the IFSF FP status as SUSPENDED STARTED and generate the respective　　 IFSF error message.　　 Action : The FP sends the unsolicited data FP_Error_Type_Mes .　　June 2005 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.21　　 DISPENSER fuel dispenser APPLICATION　　 Page: 47　　2.1.8 State Fuelling 8　　 STATE DESCRIPTION　　 The FP has now dispensed at least a minimum quantity of fuel (configured by the　　 FUELLING　　 contents of the data element Min_Fuelling_Vol) and is in the FUELLING state.　　 Observe that the FP can never return directly to the STARTED state from this　　 state.　　 EVENT DESCRIPTION　　 NOZZLE-DOWN The customer finishes the transaction by returning the nozzle.　　 The transaction is stored in the transaction buffer and the FP moves to the IDLE　　 state.　　 Action : The FP state change is send as an unsolicited data array　　 FP_Status_Message .　　 fuel dispenser SUSPEND_FP The FP receives a suspend command for whatever reason and the FP moves into　　 the SUSPENDED FUELLING state.　　 Action: The FP receives the Suspend_FP command.　　 fuel dispenser Action : The FP state change is send as an unsolicited data array　　 FP_Status_Message .　　 Action : The FP sends an unsolicited data array FP_Error_Type_Mess　　

ut then it follows long years of extraordinary distress. Habits are hard to change. So even though households now have more income—because companies are hiring more, and raising overtime and bonuses—this has not shown up in consumer spending. Alarm mounted last week when the main survey of household spending recorded a plunge in September of more than 6% compared with a year earlier. Yet this fall is too big to be credible; the survey (like early GDP numbers fuel dispenser and other Japanese statistics) is notoriously unreliable. Meanwhile, expectations are rising, even if habits have not yet caught up. Households estimates of future inflation and property prices have climbed since the spring. People are not spending gaily, but they are starting to remove money from risk-free havens and invest it again. Deflation had killed the appetite for risk. There are other signs that the recovery is still broadly on track, even if it has, as in 2004, hit a soft patch. The latest bank lending figures seem to confirm this though growth slowed in October, the year-old recovery in bank lending is still intact. On November 7th the Bank of Japan s governor, Toshihiko Fukui, gave warning that it would not wait for a build-up in inflation before raising interest rates, now at 0.25%. Many economists think that the central bank is itching to raise rates, so risking undercutting a weak economy. “Core�inflation—including energy but excluding fresh food—is just 0.2%. If energy fuel dispenser is excluded, as it is in other countries measures of core inflation, prices are actually falling. So a rate rise this year would probably generate more controversy than the central bank is ready for. Meanwhile, with interest rates low and th fuel dispenser e yen weak, monetary conditions are exceptionally loose. The economy might confound downbeat expectations in the coming months. Ditto, with luck, the prime minister. For Mr Abe is throwing out hints of wanting to bring about more far- ranging structural change than his predecessor managed. After he