POPPUMP Fiji Technical Center

Tel:(001)3474109611

POPPUMP logo

POPPUMP Fiji Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

D-GA FUEL DISPENSER

D-GA

D-GA FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type: Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer:1~~9,999,999

Hose :4.5m

Weight :280kg

Dimension(L×W×H): 900*620*2180(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 45 20ft: 22

products links

links

technical archives

    dicator is installed between nozzle and measurement transducer, by which customer observes whether foam in delivering oil. Accuracy will be affected because of much foam or bubble. Diagram 2-33 is shown a common oil indicator in domestic market. Since this kind of oil indicator has big pass section than that of two ends of pipe, velocity of flow of passing oil is reduced so as to facilitate observation. If oil transparent, that is, no foam in it, fuel dispenser is in normal state. If opaque with visible foam, it is shown that there is gas in oil. Don’t refuel until foam disappears in oil indicator. If passed long time, foam in oil indicator still exists so that the accuracy of fuel dispenser is affected, some troubleshooting measures on vapor separator should be considered. Disassemble low cover and examine fuel dispenser gasket and joint face if found leakage. Oil in pipe should be discharged completely in maintenance, keeping appropriate tightness to bolts as reassembly in case of crunching glass. 1-Frame 2-Sink-screw 3-Seal gasket 4-Glass 5-Seal 6-Cover Diagram 2-33: Ball-shaped oil indicator structure Columnar oil indicator, shown in Diagram 2-34, is installed on the top of gantry fuel dispenser, the convex end connected with pipe jointer of fuel dispenser, the concave end of it with hose unit. Foam is observed through the glass pipe of columnar oil indicator. If found leakage, d fuel dispenser isassemble oil indicator from jointer, clean waste or replace damaged gasket. Replace glass p fuel dispenser ipe when found crackle on it. Be careful of reassemble hose jointer and oil indicator after maintenance in case of crunch glass pipe. 1-Frame 2-Glass pipe 3-Seal ring 4-O-ring Diagram 2-34: Columnar oil indicator Firstly empty oil in fuel dispenser when deal with oil indicator’s trouble, for fear of oil splashing. There is a kind of method to empty here: loose bolt on corrugated pipe after start up fuel dispenser. In this state, no oil in tank is suck into fuel dispenser, but oil in fuel dispenser is discharged out continually. After stop

technical specification

    t way). The cashier acts an exception   procedure tries to recover the POS andor manages the payment in an emergency procedure.  13. If EPS tells POS that reversal was ok. Cashier gives Customer EFT Ticket and manages the   consequence (payment to be accomplished in a different way).  14. If authorisation ko EPS tells POS that reversal was not ok.  3.3 Part A - use case: Indoor card payment refund  Brief Description  The customer has paid a purchase by payment card and now for some reason he wants to be refunded (e.g.  item not good etc.). Of course the possibility to manage this feature highly depends on the business rules of  the Retailer. The customer demonstrates to the cashier the right for the refund and the cashier operates the  operation on the POS. The customer provides the c fuel dispenser ard data and the receipt data. Probably without the card  the operation would be impossible: the EPS performs this verification plus any other necessary action and if  the transaction is fulfilled the payment is refunded.  August 2002 IFSF STANDARD FORECOURT PROTOCOL FP319_1.00   EPS POS INTERFACE SPECIFICATION   Page 22 of 146  This operation affects the sales receipt and it generates lines on the balance sheet of the card: the original  payment and the refund operatio fuel dispenser n.  Pre-Conditions  The customer has paid a purchase by payment card and now for some rea fuel dispenser son the payment has to be  refunded.  The merchant has the appropriate rights to accept payment card and the site systems are correctly set to  perform the refund.  The EPS is enabled for transactions handling in a status openstand by for new transaction.  The POS is open in a shift cashier operated.  The payment card is not an e-purse.  Actors  Actor Description  Cashier Person who enters items at the POS and is accountable for the mone

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    ed and made outcasts by the “authoritarian itch?of governments, so he all the more fiercely took their side. He too had been out in the cold, like them. When he became general director of the Institute of Economic Affairs (“my little institute? as he fondly thought of it), in 1957, he was pushing ideas that were deeply out of fashion in the Keynesian post-war years. The IEA, set up by Antony Fisher in 1955, promoted deregulation, privatisation, tax cuts, trade-union reform and the free market. It attacked the welfare state, incomes policies and—Mr Harris s particular bête noire—high public spending that unleashed inflation. These opinions were so outside the bounds that Mr Harris compared the IEA in those years to a band of 30-year-old boys fooling with fireworks. Or, perhaps, lighting up in a non-smo fuel dispenser king carriage; for when he went to give talks in universities in the 1960s, most of the audience would walk out. To critics, the ideas of the IEA were all the worse for being “German? Their source was Friedrich Hayek, in fact an Austrian. Mr Harris, fresh down from Cambridge in 1947, had fallen under the spell of Hayek s “The Road to Serfdom? Serfdom was all around him then ration books, travel restrictions, the persistent shadow of wartime central planning, and most of all the depressing disposition of people to do what they were told and to suppose that this fuel dispenser was modern life. He never believed it. The way to freedom was to unleash the millions of ind fuel dispenser ividual actions that made up a working economy, and never to seek to control them. Slowly, these ideas caught on. Arthur Seldon, his chief collaborator, made the IEA s papers readable, while Mr Harris proselytised among movers and shakers and, most usefully, raised money. The IEA stayed aloof from party politics—essential, Mr Harris believed, to avoid embroilment in “vote-getting, lying and cheating”—but sought to change the intellectual climate in which politicians had to operate. Geoffrey Howe and Keith Jose